- คำอธิบาย
- สอบถามรายละเอียดเพิ่มเติม
- เอกสารแนบ
คำอธิบาย
S622E8 STM4 FIBERHOME IBAS110A supports eight channels of Ethernet services.
Both the S622E8 card and the S155E8 card are named as STM14E8 when configured in the network management system.
S622E8 card, card code WKE2.061.075R1C supports re-timing functions, namely. Performing synchronization between the output clock of the E1 interface and the equipment system clock.
S622E8 STM4 FIBERHOME IBAS110A Product Overview
Transmitting Fiberhome IBAS 110A STM4 is Uplink Main Board with Low Power Consumption The IBAS 110A system cards include S622E8 card, S155E8 card, and S155 card. The S622E8 / S155E8 system card (card code WKE2.061.073R2B) has four eight-bit DIP switches, K6, K5, K4, and K3. When the IP address is configured via a DIP switch, the equipment address is 10.18.X.X. The higher two digits are fixed and the lower two bytes digits are configured via K6 and K5 respectively with the higher two digits fixed as 0. K4 and K3 can be configured as the default working mode, which is used when the network management system is not activated.
S622E8 STM4 FIBERHOME IBAS110A Product Picture
S622E8 STM4 FIBERHOME IBAS110A Data Sheet
| item | หน่วย | ค่า | |||
| ประเภทอินเทอร์เฟซ | เอสทีเอ็ม-4 | ||||
| อัตราบิตที่กำหนด | กิโลบิต/วินาที | 622080 | |||
| Application sort code | เอส-4.1 0-30 | L-4.1 30-45 | L4.2 30-70 | L4.3 30-70 | |
| Application distance range | |||||
| Operation wavelength range | นาโนเมตร | 1274-1356 | 1296-1330 | 1480-1580 | 1480-1580 |
| Optical source type | MLM | MLM | SLM | SLM | |
| Maximum RMS spectrum width | นาโนเมตร | 2.5 | 1.7 | – | – |
| Maximum -20dBspectrum width | นาโนเมตร | – | – | <1 | 1 |
| Minimumedge-mode suppressing ratio | เดซิเบล | – | – | 30 | 30 |
| Maximum average transmitting power | เดซิเบลเมตร | -8 | 2 | 2 | 2 |
| Minimum average transmitting power | เดซิเบลเมตร | -15 | -3 | -3 | -3 |
| อัตราส่วนการสูญพันธุ์ขั้นต่ำ | เดซิเบล | 8.2 | 10 | 10 | 10 |
| Attenuation range | เดซิเบล | 0-12 | 10-24 | 10-24 | 10-24 |
| Maximum dispersion | PS/นาโนเมตร | 74 | 109 | 1840 | ไม่มี |
| The minimum return loss of optical cables atS (including any moving connector) | เดซิเบล | ไม่มี | 20 | 24 | 20 |
| Maximum disperse reflection coefficient S and R | เดซิเบล | ไม่มี | -25 | -27 | -25 |
| Minimum sensitivity(เบอร์<10-10) | เดซิเบลเมตร | -28 | -28 | -28 | -28 |
| Maximum overload(เบอร์<10-10) | เดซิเบลเมตร | -8 | -8 | -8 | -8 |
| Maximumchannel cost | เดซิเบล | 1 | 1 | 1 | 1 |
| Maximum reflectioncoefficientreceiver at R | เดซิเบล | -24 | -17 | -24 | -17 |
S622E8 STM4 FIBERHOME IBAS110A Product Features
User interface
It supports all defined overhead bytes. E1 byte is used for providing one channel of order wire; E2 and F1 bytes are used for providing four channels of data interfaces with rate < 9.6กิโลบิต/วินาที. Supports RS232 interface.
Various management interfaces
Provides F and f （f/Debug）interfaces. The F interface is connected with the network management server, which uses standard Ethernet communication protocols and processes management information from the server. The f interface is connected with PC and uses RS232
อินเตอร์เฟซ. When management network is not established, and equipment needs maintenance, f interface can also be used for equipment debugging and maintenance. ในเวลาเดียวกัน, หนึ่ง
Line interface and access capacity
It supports standard STM-1/STM-4 optical interface, a frame structure and basic functions. มันรองรับ 2 STM-1 optical interfaces. Equipment can be upgraded to STM-4 through using STM-4 system cards which support 2 STM-4 optical interfaces. The total access capability of this equipment is 64 channels of E1, among which 32 channels of E1 are provided by system card. Its total Ethernet (10/100Mbit/s） access capability is 16, with system cards (only S622E8 and S155E8 system cards) สนับสนุน 8. The total access capability of STM-1 optical tributary of this equipment is 2 and PDH optical tributary access capability is 4.
Equipment Overview
Networking ability of various topologies
It can support multiple network topologies, such as ring, chain, T-type (at most supporting 2 optical tributaries or 4 PDH optical tributaries). It can also act as the remote end of other equipment,i.e. service extension of high-level equipment. Protection mechanism When configured as STM-1 equipment, it can provide path protection. When configured as STM-4 equipment, this equipment is able to provide path protection, line protection, and 2-fiber multiplex section protection.
ฟังก์ชั่นปลุก
Provides integrated alarm and report functions of SDH, พีดีเอช, IBAS110A MSTP Equipment Ethernet, etc Provides 6 ports of circumstance monitor interfaces（TTL level） and 6 ports of control interfaces（TTL level）. Provides temperature, power alarm and performance monitor
ฟังก์ชั่น. Provides fan alarm functions and fan card can be removed out under electricity-on conditions.
S622E8 STM4 FIBERHOME IBAS110A Function Block Diagram
ขอโทษ, ไม่มีไฟล์แนบ !
