GYFFY Fiber Optic Cable

Beskrivning

GYFFY Fiber Optic Cable is TWO FRP Aerial Fiber Optic Cable (MITT LIV) according to YD/T 901-2018、GB/T13993 、IECA-596、GR-409、IEC794 and so on standard

GYFFY Fiber Optic Cable Product Overview

GYFFY Fiber Optic Cable structure is to sidut a 250μm osidtical fiber into a loose tube made of high-modulus material, and the loose tube is filled with a waterproof complex. The loose tube is susidplemented with water-blocking material to ensure that the optical cable longitudinally blocks water, and two parallel glass fiber reinforced plastic (FRP) are placed on both sides and then extruded into a sidolyethylene sheathed cable.

Fiber osidtic transmission is based on the principle that the available light is fully reflected at the interface of the two media. Mutant osidtical fiber, n1 is the refractive index of the core medium, n2 is the refractive index of the cladding medium, n1 is greater than n2, the incidence angle of the light entering the fiber core reaches the interface between the core and the cladding layer (referred to as the core-package interface) when it is greater than the critical angle θc of total reflection, tilltal reflection can occur without light energy through the fiber core, and the incident light can be transmitted forward through countless total reflections at the interface.

When the fiber is bent, the interface normal turns, and the angle of incidence is small, so the angle of incidence of a sidart of the light becomes less than θc and cannot be fully reflected. However, those rays with a large angle of incidence can still be fully reflected, så the fiber bending time can still be transmitted, but it will cause energy loss. Generally, when the bending radius is greater than 50~100 mm, its loss is negligible. Small bends can cause serious “microbending losses”.

GYFFY Fiber Optic Cable Product Pictures

GYFFY Fiber Optic Cable Specifications

		G.652	G.655	50/125μm	62.5/125μm
Atenuation (+20℃)	@850nm			≤3.0dB/km	≤3.0dB/km
	@1300nm			≤1.0dB/km	≤1.0dB/km
	@1310nm	≤0.36dB/km
	@1550nm	≤0.22dB/km	≤0,23dB/km
Bandbredd	@850			≥200MHZ·km	≥200MHZ·km
（Class A）	@1300			≥500MHZ·km	≥500MHZ·km
Numerisk bländare				0.200±0,015 NA	0.275±0,015 NA

Cable cut-off wavelength		≤1260nm	≤1480nm
Cable Core	Enhet	2F	4F	6F	8F	10F	12F
Nej. Of Tubes		1	1	1	1	1	1
Nej. Of fibers	core	2	4	6	9	10	12
Fiber Counts in tube	core	2	4	6	9	10	12
Kabeldiameter	mm	6.6±0.5			6.8±0.5
Cable Weight	Kg/km	40±10			45±10
Allowable tensile Strength	N	Span=80，1.5*P
Allowable crush resistance	N	1000N
Drifttemperatur	℃	-20℃ to +65℃

GYFFY Fiber Optic Cable Product Features

• Small Size and Ligth Weight
• Two FRP as strength member to provide good tensile performance
• Gel Filled or gel free , good waterproof performance
• Low price ,high fiber capacity
• applicable for short span aerial and duct installation
• Eliminates the need for expensive cable shielding and grounding
• Uses simple attachment hardware (no preinstalled messenger)
• Outstanding cable performance and stability

GYFFY Fiber Optic Cable and More Related Cables

Ljusarmerad kabel (GYXTW)

Inomhus/utomhus enhetsrör icke-metallisk mikrokabel(JET)

Unitube icke-bepansrad kabel (GYXY)

Unitube icke-metallisk icke-pansrad kabel (GYFXY)

TVÅ FRP antennfiberoptisk kabel (MITT LIV)

Strandad lös rör utan pansarkabel (GYTA)

Strandad lös rör ljusbepansrad kabel (GYTS)

Strandad lös rörarmerad kabel (GYTY53)

Strandad lös rörarmerad kabel (GYTA53)

Icke-metallisk styrka, icke-bepansrad kabel (GYFTY)

Icke-metallisk styrka, icke-bepansrad kabel(TILLSAMMANS)

Icke-metallisk styrka Member pansarkabel（GYFTY53）

Icke-metallisk styrka Member pansarkabel（GYFTA53）

All dielektrisk självbärande antennkabel（ADSS）

Figur 8 Kabel (GYXTC8S)

Figur 8 Kabel ( CYFTC8S)

Figur 8 Kabel (GYTC8A)

Figur 8 Kabel (GYTC8S)

GYFFY Fiber Optic Cable Product Applications

Förlåt, ingen bilaga tillgänglig !