- Описание
- Расследование
- Вложение
Описание
DAC 800G OSFP to 4x200G OSFP 1m is 800G Twin-port 2x400Gb/s OSFP to 4x200Gb/s OSFP Passive Copper Splitter Cable
DAC 800G OSFP to 4x200G OSFP 1m Product Overview
DAC 800G OSFP to 4x200G OSFP 1m is an 800Gb/s twin-port OSFP (Octal Small Form- factor Pluggable) to 4x200Gb/s OSFP passive Direct Attach Copper (DAC) dual breakout cable for 400Gb/s End-to- End Ethernet solutions. It has identical design and internals as the single-port QSFP112 version, only with different connector shells. The DAC firmware supports Ethernet and is automatically enabled depending on the protocol of the switch attached to.
Кроме того, the 8-channel twin-port OSFP end uses a finned top form-factor for use in Spectrum-4 switch cages. The four 200G ends support 2-channels of 100G-PAM4 (200г) and use a flat top OSFP for use in ConnectX-7 adapters using riding heat sinks on the connector cage.
DAC 800G OSFP to 4x200G OSFP 1m Product Pictures
DAC 800G OSFP to 4x200G OSFP 1m Product Specifications
Название модели | От ЦАП 800G OSFP до 4x200G OSFP 1 м |
Разъем | OSFP to 4xOSFP |
Wire Gages | AWG 30 |
Материал куртки | ПВХ (ОФНР) |
Рабочая Температура | 0~ 70 °С (32 до 158°F) |
Протоколы | OSFP MSA, КМИС, QSFP112 and SFF-8636 |
Максимальная скорость передачи данных | 800Гбит/с |
Длина кабеля | 1м (3футы) |
Минимальный радиус изгиба | 57мм |
Modulation Format | ПАМ4 |
Приложение | 2x400G NDR InfiniBand and Ethernet |
DAC 800G OSFP to 4x200G OSFP 1m Product Features
- 800Gb/s dual-port OSFP to 4x200Gb/s OSFP breakout copper cable
- Available in a hot-swappable OSFP package
- Octal-channel 100Gb/s PAM4 modulation
- Compliant with OSFP MSA, КМИС, and 800G/200G Ethernet standards
- Соответствует RoHS (без свинца)
- Напряжение источника питания составляет 3,3 В.
- Интерфейс управления I2C
DAC 800G OSFP to 4x200G OSFP 1m Product Applications
Извини, нет доступных вложений !