Carcasă de îmbinare cu fibră optică de tip vertical 1 În 3 Afară 24 Miez
- Descriere
- Anchetă
- Atașament
Descriere
Carcasă de îmbinare cu fibră optică de tip vertical 1 În 3 Afară 24 Core is designed to protect fiber optic cable splicing and joints. They feature a seal that makes them both dust and weather resistant. They are used in underground applications and temperatures ranging from -40°C to 65°C, and widely applied in CATV, telecommunications and fiber optic networks
Carcasă de îmbinare cu fibră optică de tip vertical 1 În 3 Afară 24 Prezentare generală de bază
Închiderea verticală cu fibră optică arată ca o cupolă, astfel se mai numește închidere de îmbinare cu fibră optică cupolă sau închidere cupolă de fibră. Forma domului face ca acesta să fie ușor îngropat în multe aplicații, though it also can be used above-ground as well.
Inchidere cu fibra optica, cunoscute și sub numele de închideri de îmbinare cu fibră optică, este un dispozitiv folosit pentru a oferi spațiu și protecție pentru cablurile de fibră optică îmbinate între ele. The fiber optic closure connects and stores optical fibers safely either in the outside plant or indoor buildings. It can provide protection for the fiber joint and the fiber cables since they have excellent mechanical strength and strong out shell, which ensures the joints are not damaged by the hostile environmen
Carcasă de îmbinare cu fibră optică de tip vertical 1 În 3 Afară 24 Imagini de bază
Carcasă de îmbinare cu fibră optică de tip vertical 1 În 3 Afară 24 Specificații de bază
Articol | fiber optic splice closure |
Utilizare | Dome splice closure for Fiber optic manufacture |
Tip | Dome splice closure |
Număr de model |
1 În 3 Afară 24 Miez |
Inner box size | 28.5*28*51cm |
Outer box size | 58.5*57.5*53cm |
waterproof rating | IP68 |
Standard and non-standard | Standard |
Material | impact resistant PP |
temperatura | -35℃~70℃ |
characterisation | cold and heat resistant |
Selling Units | Single item |
Single package size | 47.5X23.5X20.5 cm |
Single gross weight |
5.000 kg |
Culoare |
Negru |
Carcasă de îmbinare cu fibră optică de tip vertical 1 În 3 Afară 24 Caracteristici de bază
- V and Chemical Resistant
- May be used for Cut, Uncut and Taut Sheath Applications
- Dust and Waterproof design
- Ideal for Aerial and Underground applications
- Easy setup and installation
- Material: Polycarbonate Plastic
- Lăţime: 180mm
- Înălţime: 540mm
Carcasă de îmbinare cu fibră optică de tip vertical 1 În 3 Afară 24 Core Performance requirements
After the fiber connector is protected by the splice closure and should be protected from moisture, the attenuation of the fiber connector before protection should not be increased, and the following requirements should be met:
- Optical performance
The remaining optical fibers in the optical cable splice closure are coiled in the optical fiber placement device, and there should be no obvious additional attenuation of the optical fiber splice splice closure during the installation and use of the optical fiber splice closure operation.
- Sealing performance
After the optical cable splice closure is packaged according to the specified operating procedures, the inflation pressure in the optical cable splice splice closure is (100±5) kPa, and there should be no bubbles escaping after soaking it in a clean water container at room temperature for 15 minutes, or there should be no change in the barometer indication after stable observation for 24 ore.
- Resealing performance
The optical cable splice closure is tested after repeating the package 3 times according to the specified operating procedure. The inflation pressure in the fiber optic cable splice splice box is l00kPa±5kPa, and there should be no bubbles escaping after soaking in a clean water container at room temperature for 15 minutes, or there should be no change in the barometer indication for 24 ore.
- Mechanical properties
After the following tests, the box body and each part of the box of the optical cable splice splice box should not change, and if necessary, the light inspection or opening of the box should be done. The following tests should be filled with (60±5) kPa air pressure in the fiber optic cable splice closure and the air pressure should not change after the test; Stable observation in a clear water container immersed in room temperature No bubbles should escape or stable observation for 24 ore, the barometer index should be unchanged, and the shell and its components should be free of cracks, damage and obvious deformation
Carcasă de îmbinare cu fibră optică de tip vertical 1 În 3 Afară 24 Core and More Items
Carcasă de îmbinare cu fibră optică de tip vertical 1 În 2 Afară 12 Miez
Carcasă de îmbinare cu fibră optică de tip vertical 1 În 3 Afară 12 Miez
Carcasă de îmbinare cu fibră optică de tip vertical 1 În 3 Afară 24 Miez
Carcasă de îmbinare cu fibră optică de tip vertical 1 În 3 Afară 48 Miez
Carcasă de îmbinare cu fibră optică de tip vertical 1 În 4 Afară 72 Miez
Carcasă de îmbinare cu fibră optică de tip vertical 1 În 4 Afară 96 Miez
Carcasă de îmbinare cu fibră optică de tip vertical 1 În 4 Afară 144 Miez
Carcasă de îmbinare cu fibră optică de tip vertical 1 În 3 Afară 24 Aplicații de bază
Îmi pare rău, nici un atașament disponibil !