- Description
- Inquiry
- Attachment
Description
Huawei EDSH Service Board is 32-channel E1 upstream board, supporting native TDM mode.
Huawei EDSH Service Board Product Overview
Huawei EDSH Service Board is 2×16-channel E1 interface (NE96 Connector, 96PIN, PCB PressFit Type) applying for MA5800 Series OLT equipment and this board supports transparent transmission and convergence of digital data network (DDN) private line service and temperature query and high-temperature alarm.
The MA5800 series include three sizes of large, medium and small, namely MA5800-X17, MA5800-X7 and MA5800-X2, and support multiple networking applications such as FTTB/FTTC/FTTD/FTTH/D-CCAP. The 1U box OLT product MA5801 supports full optical access coverage in low-density areas.
It adopts a distributed architecture and supports a common platform of PON/10G PON/GE/10GE. MA5800 supports multi-media Gigabit convergence, best 4K/8K/VR video experience, multi-service virtualization common platform, and 50G PON smooth evolution.
Huawei EDSH Service Board Product Pictures
Huawei EDSH Service Board Product Specifications
Brand | Huawei |
Part Number | 03023APF |
Model | EDSH |
Product Description | 32 port E1 Service Board |
Product Series | MA5800-X7 MA5800 X2 MA5800 X15 MA5800 X17 |
Dimensions (H x W x D) | 442 mm x 268.7 mm x 263.9 mm |
Maximum Number of Ports in a Subrack | 112 x GPON/EPON |
336 x GE/FE | |
56 x 10G GPON/10G EPON | |
56 x 10G GE | |
224 x E1 | |
Switching Capacity of the System | 7 Tbit/s |
Maximum Number of MAC Addresses | 262,143 |
Maximum Number of ARP/Routing Entries | 64K |
Ambient Temperature | -40°C to 65°C |
Note: The MA5800 can start up at a lowest temperature of -25°C and run at -40°C. The 65°C temperature refers to the highest temperature measured at the air intake vent | |
Working Voltage Range | -38.4V DC to -72V DC |
Layer 2 Features | VLAN + MAC forwarding, SVLAN + CVLAN forwarding, PPPoE+, and DHCP option82 |
Layer 3 Features | Static route, RIP/RIPng, OSPF/OSPFv3, IS-IS, BGP/BGP4+, ARP, DHCP relay, and VRF |
Huawei EDSH Service Board Product Features
- MPLS LDP, MPLS RSVP-TE, MPLS OAM, MPLS BGP IP VPN, tunnel protection switching, TDM/ETH PWE3, and PW protection switching
- IPv4/IPv6 dual stack, IPv6 L2 and L3 forwarding, and DHCPv6 relay
- IGMP v2/v3, IGMP proxy/snooping, MLD v1/v2, MLD Proxy/Snooping, and VLAN-based IPTV multicast
- Traffic classification, priority processing, trTCM-based traffic policing, WRED, traffic shaping, HqoS, PQ/WRR/PQ + WRR, and ACL
- GPON type B/type C protection, 10G GPON type B protection, BFD, ERPS (G.8032), MSTP, intra-board and inter-board LAG, In-Service Software Upgrade (ISSU) of the control board, 2 control boards and 2 power boards for redundancy protection, in-service board fault detection and rectification, and service overload control
Huawei EDSH Service Board Product and More Service Boards
H901MPSC | 4 GE/10GE upstream transmission ports and supports load sharing. By default, MA5800 connects to the upstream network through the control board |
H901NXED | Enhanced 8-port 10GE upstream interface board, supporting 10GE/GE Ethernet upstream transmission. NXED is used when upstream ports currently provided in MA5800 are not enough. |
H901GPHF | 16 GPON ports for access services |
H901GPSF | 16 GPON ports for home access services |
H901XGHD | 8 asymmetric 10G GPON ports for access services. |
H901TWED | 8 symmetric 10G GPON ports for access services. |
H901EDSH | 32-channel E1 upstream board, supporting native TDM mode. |
H901OGHK | 48-port aggregated GE/FE optical interface board, supporting up to 48 channels of GE/FE |
H901OXHD | 8-port aggregated 10GE optical interface board, supporting GE/10GE Ethernet aggregation. |
H901PISA | -48V DC input |
H901PISB | one AC power input and supports battery for power backup. |
H901FMSA | Supplier power to fans; controls and monitors the fans |
H902CGHF | 16-port 10G GPON and GPON combo OLT Interface Board with XGPON & GPON C+ Optical Module |
Huawei EDSH Service Board Product Applications
Sorry, no attachment available !