- Description
- Inquiry
- Attachment
Description
Cisco ASR 9006 Router represents an exciting new paradigm in edge and core routing。
It has a wide product portfolio, ranging from the Cisco ASR 9001 (2 Rack Units [2RU]) to the Cisco ASR 9922 (44RU), with each system designed to provide true carrier-class reliability using the Cisco IOS® XR operating system, comprehensive system redundancy, and a full complement of network resiliency schemes.
Cisco ASR 9006 Router also offers service and application-level intelligence focused on optimized video delivery and mobile aggregation. Finally, this model is designed to simplify and enhance the operational and deployment aspects of service-delivery networks.
Cisco ASR 9006 Router Product Picture
Cisco ASR 9006 Router Datasheet
| Specification | Model |
| Cisco ASR 9006 | |
| Physical specifications | Height: 17.50 in. (444.5 mm) (10 RU) |
| Width: 17.38 in. (441.45 mm) | |
| Depth: | |
| With doors: 29.05 in. (737.9 mm) | |
| Without doors: 29.05 in. (737.9 mm) | |
| Weight: | |
| 89.55 lb (40.7 kg) (chassis with PEM) | |
| 150 lb (65.91 kg) (fully loaded, excluding linecards and power modules) – RSP, two v2 FAN trays, PEMs | |
| Slot orientation | Horizontal |
| Cisco ASR 9000 Series RSP | Dual redundant RSPs with integrated fabric in 2 slots |
| Cisco ASR 9000 Series line cards | 4 line-card slots |
| “Commons” components | 2 RSPs |
| 2 fan trays | |
| 1 PEM (either DC or AC) | |
| 1 fan filter | |
| Reliability and availability | Fabric redundancy |
| Fan redundancy | |
| Feed redundancy | |
| Power-supply redundancy | |
| RSP redundancy | |
| Software redundancy | |
| Rack mounting | 19-in. default |
| 21- and 23-in. adapters available | |
| Note: Minimum 17.75-in. opening between posts is needed for proper operation | |
| Cabinet mounting | Yes |
| Note: Doors not recommended in enclosed cabinets | |
| Wall mounting | No |
| Airflow | Right-to-back, Front-to-back with baffle |
| Performance | |
| Fabric | One per RSP: |
| Active/active nonblocking operation mode in dual-RSP redundant configuration | |
| Fully redundant in dual-RSP redundant configuration | |
| Built-in service-intelligence and traffic-prioritization capability | |
| Thermal | Two fan trays: |
| 6 high-efficiency fans per tray | |
| Variable-speed fans for optimal thermal performance | |
| No single point of failure | |
| Power | |
| Modularity | Pay-as-you-grow power for future scalability, available in AC and DC. |
| Multiple power module types: | |
| 3 kW AC power module | |
| 2.1 kW DC power module | |
| Note: Mixing of AC and DC modules is not supported | |
| Redundancy | AC: N+N redundancy |
| DC: N+1 redundancy | |
| Power module redundancy | |
| A/B Feed redundancy | |
| Power zones | No power zone restrictions |
| Fully load-sharing power infrastructure | |
| Power input | Worldwide ranging AC (200-240V; 50-60 Hz; 16A maximum) |
| Worldwide ranging DC (-40 to -72V; 50A nominal, 60A maximum) | |
| Power-module airflow | Front-to-back |
| Environmental Specifications (All Entries Applicable to Cisco ASR 9006 and ASR 9010) | |
| Operating temperature (nominal) | 41 to 104ºF (5 to 40ºC) |
| Operating temperature (short-term)[2] | ASR 9006: 23 to 131ºF (-5 to 55ºC) |
Cisco ASR 9006 Router Feature
Cisco ASR 9006 Router bring a fresh new “conscious” approach to product development. From optimal thermal design to the architecture of the power infrastructure, from the placement of line-card components to the pitch of each slot,
Ready for the transition to IPv6: Cisco is delivering on our strategy of building out IPv6 next-generation networks to simplify design, deployment, and management of services for global service providers.
Cisco ASR 9006 Router offers a significant added value compared to the prior generations of Carrier Ethernet routing offerings with significantly higher switching capacity, optimized power and cooling requirements, an innovative modular power architecture, a grounds-up high-availability design。
Sorry, no attachment available !
