- Opis
- Zapytanie
- Załącznik
Opis
Huawei SSE1MCA Board is multi-channel spectrum analysis unit WDM equipment
Huawei SSE1MCA Board Product Overview
Huawei SSE1MCA Board belongs to the spectral analysis unit, and is mainly used to provide optical signal spectral analysis.
Huawei SSE1MCA Board consists of 1×8 optical switch, spectrum analysis module, drive and control module, control and communication module and power supply module.
W tym samym czasie, 1×8 optical switch selects one optical signal and sends it to the spectrum analysis module to analyze various parameters. The analyzed and converted data parameters are sent to the control and communication module through the data interface. The control and communication module further reports the parameter results to the SCC board and NM system. The final spectrum analysis results are presented on the interface of the network management system.
Huawei SSE1MCA Board Product Pictures
Huawei SSE1MCA Board Product Specifications
| Przedmiot | Jednostka | Indeks |
| Roboczy zakres długości fal | nm | Pasmo C：1529～1561 |
| Single wave power detection range | dBm | -10～-30 |
| Power detection accuracy | dBm | ±1.5 a |
| OSNR detection accuracy (signal-to-noise ratio detection range 13 ~ 23 dB, 50GHz wavelength interval) | dB | ±1.5 (OSNR detection range: 13～19) |
| ±2 (OSNR detection range: 19～23) | ||
| Center wavelength detection accuracy | nm | ±0.1 |
| Laser safety level | ||
| The laser damage level of the single board optical interface is HAZARD LEVEL 1, and the maximum output optical power of the optical port is less than 10dBm (10mW). | ||
| Mechanical index | ||
| The mechanical indicators of the board are as follows: | ||
| Wymiary (H×W×D): 345.0mm×76.0mm×218.5mm | ||
| Waga: 1.7kg | ||
| Pobór energii | ||
| The power consumption of the board is as follows: | ||
| Maximum power consumption of the board at normal temperature (25℃): 7.0W | ||
| Maximum power consumption of single board under high temperature (55℃): 7.7W | ||
Huawei SSE1MCA Board Product Features
- Monitoring channel
- Analyze channel status
- Generate wave and wave drop alarms
- The scan interval of the same port on the MCA board is 17s.
- MCA board can display the following information on U2000, monitor and report
- Channel optical power
- Środkowa długość fali
- Optical signal-to-noise ratio
- Number of wavelengths in the optical channel
Notatka
The MCA board supports the detection of the center wavelength and number of wavelengths of optical signals of all rates.
When the system includes optical signals of 40Gbit/s and above:
If the wavelength interval is 50GHz, OSNR detection at all rates is not supported.
If the wavelength interval is 100 GHz, only OSNR detection with a rate less than or equal to 10 Gbit/s is supported.
When the rate of all optical signals in the system is less than or equal to 10Gbit/s, OSNR detection of all rate signals is supported.
Huawei SSE1MCA Board Product Applications
Przepraszam, brak dostępnego załącznika !
