- Beschrijving
- Navraag
- Bijlage
Beschrijving
Cisco QSFP-100G-CWDM4-S Module is 100GBASE CWDM4 QSFP Transceiver, LC, 2km boven SMF
Cisco QSFP-100G-CWDM4-S Module Product Overview
Cisco QSFP-100G-CWDM4-S Module supports link lengths of up to 2 km over a standard pair of G.652 Single-Mode Fiber (SMF) met duplex LC-connectoren. De 100 Het Gigabit Ethernet-signaal wordt over vier golflengten overgedragen. Multiplexing en demultiplexing van de vier golflengten worden binnen het apparaat beheerd.
Cisco QSFP-100G-CWDM4-S Module offers customers a wide variety of high-density and low-power 100 Gigabit Ethernet connectivity options for data center, krachtige computernetwerken, ondernemingskern- en distributielagen, en dienstverlenerapplicaties. De QSFP-100G-modules zijn onze nieuwste generatie 100G-transceivermodules, gebaseerd op een QSFP-vormfactor.
Cisco QSFP-100G-CWDM4-S Module Product Picture
Cisco QSFP-100G-CWDM4-S Module Product Specification
Item | Beschrijving |
Merk | Cisco |
Model | QSFP-100G-CWDM4-S |
Vormfactor van de zendontvanger | QSFP28 |
Transmissiesnelheid | 100GE |
Centrale golflengte (nm) | 1271, 1291, 1311, 1331 |
Naleving van normen | 100GBASE-CWDM4 (niet standaard) |
Connectortype | LC |
Toepasselijke kabel en maximale transmissieafstand | Single-mode glasvezel (G.652): 2 km |
Zend kracht uit (dBm) | -6.5 naar +2.5 |
Maximale ontvangergevoeligheid (dBm) | -9.8 |
Overbelast vermogen (dBm) | 2.5 |
Uitstervingsratio (dB) | 3.5 |
Bedrijfstemperatuur | 0°C tot 70 °C (32°F tot 158 °F) |
Cisco QSFP-100G-CWDM4-S Module Product Feature
- Low power per bit, 1.5 Watts per end
- Saving of > 60% in card edge and board density compared to the use of four SFP+ modules–enabling to shrink sysF-tonem size and lower overall costs
- z-axis electrical hot-pluggability allowing port population on demand and in
- the field. Utilizes XFP type latching mechanism into board mounF-toned cage.
- Digital diagnostic monitoring inF-tonerface similar to that used by SFP+ modules. This allows customer access to key module parameF-toners as well as providing alarm and warning flags. This improves customer sysF-tonem management capability.
- Differential, inF-tonernally AC-coupled data I/Os
- Electrically z-pluggable, allowing port population on demand
- Optical connectivity via industry standard MPO/MTP F-tonerminaF-toned fiber ribbon
- InF-tonernal CDR circuits on both receiver and transmitF-toner channels
- TransmitF-toner input equalizers that can compensaF-tone for up to 12 dB bij 12.9 GHz
Cisco QSFP-100G-CWDM4-S Module and More 100G SFP Unit
Model | Beschrijving | Connector Type |
QSFP-100G-SR4-S | 100GBASE SR4 QSFP-zendontvanger, MPO, 100m boven OM4 MMF | MPO-12 (12 vezels) |
QSFP-40/100-SRBD | 100G and 40GBASE SR-BiDi QSFP Transceiver, LC, 100m OM4 MMF | LC |
QSFP-100G-PSM4-S | 100GBASE PSM4 QSFP-zendontvanger, MPO, 500m boven SMF | MPO-12 (12 vezels) |
QSFP-100G-DR-S | 100GBASE DR QSFP Transceiver, 500m boven SMF | LC |
QSFP-100G-FR-S | 100GBASE FR QSFP Transceiver, 2km boven SMF | LC |
QSFP-100G-CWDM4-S | 100GBASE CWDM4 QSFP-zendontvanger, LC, 2km boven SMF | LC |
QSFP-100G-SM-SR | 100GBASE CWDM4 Lite QSFP-zendontvanger, 2km boven SMF, 10-60C | LC |
QSFP-100G-LR-S | 100GBASE LR QSFP Transceiver, 10km boven SMF | LC |
QSFP-100G-LR4-S | 100GBASE LR4 QSFP-zendontvanger, LC, 10km boven SMF | LC |
QSFP-100G-ER4L-S | 100GBASE QSFP Transceiver, 25-40KM reach over SMF, Duplex-LC | LC |
QSFP-100G-CU (1M, 2M, 3M, 5M) | 100GBASE-CR4 Passive Copper Cable | |
QSFP-4SFP25G-CU (1M, 2M, 3M, 5M) | 100GBASE QSFP to 4xSFP25G Passive Copper Splitter Cables | |
QSFP-100G-AOC (1M, 2M, 3M, 5M, 7M, 10M, 15M, 20M, 25M, 30M) | 100GBASE QSFP Active Optical Cables |
Cisco QSFP-100G-CWDM4-S Module Product Application
Sorry, geen bijlage beschikbaar !