Cisco WS-C3850-48T-L Switch

Description

Cisco WS-C3850-48T-L Switch is the next generation of enterprise-level stackable access-layer switches which provide full convergence between wired and wireless on a single platform.

Cisco WS-C3850-48T-L Switch General Introduction

Cisco’s new Unified Access Data Plane (UADP) application-specific integrated circuit (ASIC) powers the switch and enables uniform wired-wireless policy enforcement, application visibility, flexibility and application optimization.

This convergence is built on the resilience of the new and improved Cisco StackWise-480.

3850 Series Switches support full IEEE 802.3at Power over Ethernet Plus (PoE+), modular and field-replaceable network modules, redundant fans and power supplies.

Cisco WS-C3850-48T-L Switch Product Picture

Cisco WS-C3850-48T-L Switch Feature

Converged wired plus wireless access

The Cisco Catalyst 3850 is the first stackable access switching platform that enables wired plus wireless services on a single Cisco IOS XE software-based platform.

Flexible NetFlow (FNF)

Full visibility into the wired plus wireless traffic is achieved because of the access point Control and Provisioning of Wireless Access Points (CAPWAP) tunnel termination on the switch.

Advanced wired plus wireless QoS capabilities

The 3850 switch has advanced wired plus wireless QoS capabilities. It uses the Cisco modular QoS command line interface (MQC). The switch manages wireless bandwidth using unprecedented hierarchical bandwidth management starting at the per-access-point level and drilling further down to per-radio, per-service set identification (SSID), and per-user levels.

Provides a rich set of security features

The Cisco Catalyst 3850 provides a rich set of security features for wired plus wireless users. Features such as IEEE 802.1x, Dynamic Host Configuration Protocol (DHCP) snooping, IP Source Guard and control plane protection, wireless intrusion prevention systems (WIPSs), and so on enable protection against unauthorized users and attackers.

 

Cisco WS-C3850-48T-L Switch Datasheet

Brand	Cisco
Product Code	WS-C3850-48T-L
Enclosure Type	1 RU
Feature Set	LAN Base
Ports	48 x 10/100/1000
Maximum stacking number	9
Stack bandwidth	480 Gbps
Forwarding Performance	130.95 Mpps
Switching Capacity	176 Gbps
RAM	4 G
Flash Memory	2 G
Dimensions	44.5 cm x 44.5 cm x 4.45 cm
Package Weight	17.49 Kg
Network SFP uplink module selection	C3850-NM-4-1G
	C3850-NM-2-10G
	C3850-NM-4-10G

Cisco WS-C3850-48T-L Switch Port show

Note：
① Ground connector
② CONSOLE (RJ-45 console port)
③ StackWise port connector
④ StackPower connector
⑤ Power supply modules
⑥ Fan modules
⑦ MGMT port
⑧ Reset Button

Cisco Catalyst 3850 Switch Model
WS-C3850-48T-L
WS-C3850-48T-S
WS-C3850-48T-E
WS-C3850-48P-L
WS-C3850-48P-S
WS-C3850-48P-E
WS-C3850-48F-L
WS-C3850-48F-S
WS-C3850-48F-E
WS-C3850-48XS-S
WS-C3850-48XS-E
WS-C3850-12XS-S
WS-C3850-12XS-E
WS-C3850-24S-S
WS-C3850-24S-E
WS-C3850-24T-L
WS-C3850-24T-S
WS-C3850-24T-E
WS-C3850-24P-L
WS-C3850-24P-S
WS-C3850-24P-E
WS-C3850-24XS-S
WS-C3850-24XS-E

Sorry, no attachment available !