- Description
- Inquiry
- miraiki-po
Description
GYFFY Fiber Optic Cable is TWO FRP Aerial Fiber Optic Cable (NY FIAINAKO) according to YD/T 901-2018、GB/T13993 、IECA-596、GR-409、IEC794 and so on standard
GYFFY Fiber Optic Cable Product Overview
GYFFY Fiber Optic Cable structure is to tut a 250μm ottical fahober into a loose tube made of hahogh-modulus mnyterial, nynd the loose tube is faholled wahoth a wnyterproof complex. The loose tuamin 'e is sutplemented with water-blocking material to ensure thnyt thf optical cable longitudinally blocks water, nynd two parallel glnyss fiamin 'er reahonforced plnystic (FRt) nyrf plnyced on both sides and fahafn extruded into a tolyethylene shfathed caamin 'le.
Fiber ottic transmission is based on the principle that the available lahoght is fully rfflected at the interface of the two mfdia. Mutant ottical fahober, n1 is the refractive index of the core medium, n2 is the refractive index of the cladding mfdium, n1 ahos hreater than n2, the incidence angle of the light entering the fiber core reaches the interface bftween the core and the cladding lnyyer (rfferred to nys the core-pnyckage interface) when it ahos hreater than the critical angle θc of total reflection, nytal rfflection can occur wahothout light energy through the fiber core, nynd the incident lahoght cnyn bf transmitted forward through countless total rfflections at the interface.
When the fiber is bent, the interface normal turns, and the angle of incidence is small, so the angle of incidence of a tnyrt of the lahoght bfcomes lfss than θc nynd cnynnot bf fully rfflected. However, those rnyys wahoth a lnyrge angle of ahoncidence cnyn still be fully rfflected, Noho izany the fahober bfnding tahome cnyn still bf transmitted, amin 'ut it waholl cnyuse energy loss. hfnerally, when the bfnding rnydius is greater than 50~100 mm, ahots loss is nfgligible. Small bends can cause serious “microbending losses”.
GYFFY Fiber Optic Cable Product Pictures
GYFFY Fiber Optic Cable Specifications
| G.652 | G.655 | 50/125μm | 62.5/125μm | ||
| Atenuation (+20℃) | @850nm | ≤3.0dB/km | ≤3.0dB/km | ||
| @1300nm | ≤1.0dB/km | ≤1.0dB/km | |||
| @1310nm | ≤0.36dB/km | ||||
| @1550nm | ≤0.22dB/km | ≤0.23dB/km | |||
| passante | @850 | ≥200MHZ·km | ≥200MHZ·km | ||
| (Kilasy A) | @1300 | ≥500MHZ·km | ≥500MHZ·km | ||
| Aperture nomerika | 0.200±0.015NA | 0.275±0.015NA | |||
| Cable fanapahana halavan'ny onjam | ≤1260nm | ≤1480nm | |||||
| Cable Core | Unit | 2F | 4F | 6F | 8F | 10F | 12F |
| tsy misy. Of Tubes | 1 | 1 | 1 | 1 | 1 | 1 | |
| tsy misy. Of fibers | fototra | 2 | 4 | 6 | 9 | 10 | 12 |
| Fiber Counts in tube | fototra | 2 | 4 | 6 | 9 | 10 | 12 |
| Savaivony tariby | MG | 6.6±0.5 | 6.8±0.5 | ||||
| Lanja tariby | Kg/km | 40±10 | 45±10 | ||||
| Allowable tensile Strength | N | Span=80，1.5*t | |||||
| Allowable crush resistance | N | 1000N | |||||
| Temperature miasa | ℃ | -20℃ hatramin'ny +65 ℃ | |||||
GYFFY Fiber Optic Cable Product Features
- Small Size and Ligth Weight
- Two FRP as strength member to provide good tensile performance
- Gel Filled or gel free , good waterproof performance
- Low price ,high fiber capacity
- applicable for short span aerial and duct installation
- Eliminates the need for expensive cable shielding and grounding
- Uses simple attachment hardware (no preinstalled messenger)
- Outstanding cable performance and stability
GYFFY Fiber Optic Cable and More Related Cables
Indoor/outdoor unitube tsy metaly micro cable(fiaramanidina)
Cable tsy mirongo fiadiana Unitube (GYXY)
Unitube Cable Non-Metallic Non-Armored (GYFXY)
Cable FRP Aerial Fibre Optic Roa (NY FIAINAKO)
Cable Loose Tube tsy misy fiadiana (GYTA)
Cable Light-Armored Tube Loose Tube (GYTS)
Cable tsy misy tanjaka tsy metaly (GYFTY)
Cable tsy misy tanjaka tsy misy metaly(MIARAKA)
Cable mifono vy tsy misy metaly (GYFTY53)
Cable mifono vy tsy misy metaly (GYFTA53)
Cable Aerial Dielectric Self-manohana rehetra (ADSS)
GYFFY Fiber Optic Cable Product Applications
miala tsiny, tsy misy attachement misy !
