Driver principale Meanwell ELG-200-36A
- Descrizione
- Inchiesta
- Allegato
Descrizione
Meanwell ELG-200-36A Led Driver is a 200W LED AC to DC driver featuring constant current output and constant voltage output design.
Meanwell ELG-200-36A Led Driver General Introduction
This series can operate at input voltages of 100-305VAC and offers a variety of models with output voltage ratings between 12V and 54V. With a high conversion efficiency of up to 91%, the fanless design allows it to operate at a temperature range of -40-90° under natural air cooling. The metal housing and IP67/IP65 high degree of protection design make the ELG-200 series suitable for indoor and outdoor applications. The ELG-200 is equipped with a variety of function options such as several dimming methods to provide design flexibility for the lighting system.
Meanwell ELG-200-36A Led Driver Product Picture
Meanwell ELG-200-36A Led Driver Datasheet
| Modello | Categoria | IP Level | Input/Output type | Introduction |
| Blank | Standard | IP67 | Cavo | IO/VO Fixed |
| UN | Standard | IP65 | Cavo | IO/VO Adjustable via Built-in Potentiometer |
| B | Standard | IP67 | Cavo | 3 In 1 Dimension function (0-10 Vcc,10V PWM signal and resistance |
| D2 | Standard | IP67 | Cavo | Smart timer dimming function |
| DA | Standard | IP67 | Cavo | Dali function |
| MODEL | ELG-200-36 | ELG-200-12 | ELG-200-24 | ELG-200-42 | |
| OUTPUT | DC VOLTAGE | 36V | 12V | 24V | 42V |
| CONSTANT CURRENT REGION | 18 ~ 36V | 6 ~ 12V | 12 ~ 24V | 21 ~ 42V | |
| RATED CURRENT | 5.55UN | 16UN | 8.4UN | 4.76UN | |
| RATED POWER | 200VAC ~ 305VAC | ||||
| 199.8W | 192W | 201.6W | 199.9W | ||
| 100VAC ~ 180VAC | |||||
| 149.76W | 144W | 150W | 149.94W | ||
| RIPPLE & NOISE (max.) | 250mVp-p | 150mVp-p | 200mVp-p | 250mVp-p | |
| VOLTAGE ADJ. RANGE | Adjustable for A-Type only (via the built-in potentiometer) | ||||
| 33.5 ~ 38.5V | 11.2 ~ 12.8V | 22.4 ~ 25.6V | 39 ~ 45V | ||
| CURRENT ADJ. RANGE | Adjustable for A-Type only (via the built-in potentiometer) | ||||
| 2.78 ~ 5.55A | 8 ~ 16A | 4.2 ~ 8.4A | 2.38 ~ 4.76A | ||
| VOLTAGE TOLERANCE | ±2.0% | ±3.0% | ±2.0% | ±2.0% | |
| LINE REGULATION | ±0.5% | ±0.5% | ±0.5% | ±0.5% | |
| LOAD REGULATION | ±0.5% | ±2.0% | ±0.5% | ±0.5% | |
| SETUP, RISE TIME | 500SM, 100ms/230VAC, 1000SM, 100ms/115VAC | ||||
| HOLD UP TIME (Tip.) | 10ms/ 230VAC 10ms/ 115VAC | ||||
| INPUT | VOLTAGE RANGE | 100 ~ 305VAC 142 ~ 431VDC | |||
| FREQUENCY RANGE | 47 ~ 63Hz | ||||
| POWER FACTOR | PF>=0.97/115VAC,PF>=0.95/230VAC PF>=0.92/277VAC at full load (Please refer to “Power Factor Characteristic” curve) | ||||
| TOTAL HARMONIC DISTORTION | THD< 20% when output loading>=50% at 115VAC , 230VAC input ; and output loading>=75% at 277VAC input | ||||
| EFFICIENCY (Tip.) | 92% | 90% | 92% | 92.50% | |
| AC CURRENT | 1.8UN / 115VAC 1.2A / 230VAC 1.0A/277VAC | ||||
| INRUSH CURRENT (Tip.) | COLD START 60A(twidth=510μs measured at 50% Ipeak) at 230VAC; Per NEMA 410 | ||||
| MASSIMO. NO. of PSUs on 16A CIRCUIT BREAKER | 4 units (circuit breaker of type B) / 6 units (circuit breaker of type C) at 230VAC | ||||
| LEAKAGE CURRENT | <0.75mA / 277VCA | ||||
| NO LOAD / STANDBY | No load power consumption <0.5W for Blank / UN / Dx / D-Type | ||||
| POWER CONSUMPTION | Standby power consumption <0.5W for B / DA-Type | ||||
| PROTECTION | OVERCURRENT | 95 ~ 108% | |||
| Protection type: Constant current limiting, recovers automatically after fault condition is removed | |||||
| SHORT CIRCUIT | Hiccup mode recovers automatically after fault condition is removed | ||||
| OVERVOLTAGE | 42 ~ 49V | 13.5 ~ 18V | 27 ~ 34V | 47 ~ 54V | |
| Protection type: Shut down o/p voltage, re-power on to recovery | |||||
| OVER TEMPERATURE | Shut down o/p voltage, re-power on to recovery | ||||
| ENVIRONMENT | WORKING TEMP. | Tcase=-40 ~ +90°C(Refer to “Derating Curve”) | |||
| MASSIMO. CASE TEMP. | Tcase=+90°C | ||||
| WORKING HUMIDITY | 20 ~ 95% RH non-condensing | ||||
| STORAGE TEMP., HUMIDITY | ’-40 ~ +90°C,10~95% RH | ||||
| TEMP. COEFFICIENT | ±0.03%/°C (0 ~ 50°C) | ||||
| VIBRATION | 10 ~ 500Hz, 5G 12min./1cycle, period for 72min. each along X, Y, Z axes | ||||
| SAFETY & EMC | SAFETY STANDARDS | U8750(type”HL”), CSA C22.2 No. 250.13-12; ENEC EN61347-1, EN61347-2-13 independent, EN62384;GB19510.1, GB19510.14,B19510.1; IP65 or IP67 approved | |||
| DALI STANDARDS | Compliy with IEC62386-101, 102, 207 for DA-Type only | ||||
| WITHSTAND VOLTAGE | I/P-O/P:3.75KVAC I/P-FG:2.0KVAC O/P-FG:1.5KVAC | ||||
| ISOLATION RESISTANCE | I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VCC / 25°C/ 70% RH | ||||
| EMC EMISSION | Compliance to EN55015,EN61000-3-2 Class C (>=50% loading) ; EN61000-3-3; GB17625,GB17743 | ||||
| EMC IMMUNITY | Compliance to EN61000-4-2,3,4,5,6,8,11; EN61547, light industry level (surge immunity Line-Earth 6KV, Line-Line 4KV) | ||||
| OTHERS | MTBF | 826.7K hrs min. Telcordia SR-332 (Bellcore) ; 200.8Khrs min. MIL-HDBK-217F (25°C) | |||
| DIMENSION | 244 71**37.5mm (L*W*H) | ||||
| PACKING | 1.05Kg 12pcs/13.6kg/0.72CUFT | ||||
Meanwell ELG-200-36A Led Driver Application scenario
LED Street Lighting
LED bay Lighting
LED floodlighting
LED architectural Lighting
Tipo ”’HL” for use in Class I, Division 2 hazardous (Classified) location
Comply with class II application
Scusa, nessun allegato disponibile !
