Cisco-Aironet-1532-Access-Point-1.jpg
Cisco-Aironet-1532-Access-Point-4.jpg
Cisco-Aironet-1532-Access-Point-3.jpg
Cisco-Aironet-1532-Access-Point-2.jpg

Cisco Aironet 1532 Hozzáférési pont

Cisco Aironet 1815t hozzáférési pont
Kategória: Címkék: ,

Leírás

Cisco Aironet 1532 Access Point supports a wide variety of applications. With their sleek profile, we can deploy them wherever you need coverage while meeting your aesthetic requirements.

Cisco Aironet 1532 Access Point Product Introduction

There are 2 different models for Cisco 1532 sorozat

AIR-CAP1532I-x-K9; 802.11n Low-Profile Outdoor AP, Internal Ant., x Reg Dom.
AIR-CAP1532E-x-K9; 802.11n Low-Profile Outdoor AP, External Ant., x Reg Dom.

The Cisco Aironet 1532I Outdoor Access Point is a low-profile, lightweight model. The smaller size and sleeker look help it blend in with the surrounding environment. The Cisco Aironet 1532I access points are dual-radio systems with internal antennas and comply with IEEE 802.11b/g/n (2.4 GHz) and 802.11a/n (5 GHz) szabványoknak. The 2.4-GHz radio is a 3×3 multiple-input and multiple-output (MIMO) radio。

The Cisco Aironet 1532E Outdoor Access Point is also a low-profile and lightweight model, but it supports a flexible radio coverage area through the use of external antennas. With the unique Cisco Flexible Antenna Port technology, the antenna ports can be software configured for dual-band or single-band operation.

Cisco Aironet 1532 Access Point termékkép

Cisco Aironet 1532 Hozzáférési pontCisco Aironet 1532 Hozzáférési pont

Cisco Aironet 1532 Access Point Datasheet

The Cisco Aironet 1530 Series Access Point can connect to the network wirelessly or through a wired Ethernet connection.

Wireless: An access point that connects to the network through another access point via a wireless backhaul is called a mesh access point (MAP). Built-in backhaul radio, MAP does not require a wired connection. An access point that acts as a gateway to a mesh node is called a Root Access Point (RAP). RAP is connected to the network via a wired Ethernet connection. In these cases, the liquid-tight adapter is provided with an access point to seal the cable entry.

Ethernet: The Cisco Aironet 1530 Series supports 10/100/1000 Gigabit Ethernet with shielded RJ-45 connectors and a minimum of Category 5 cable. For local rated cables and shielded connectors, please consult your local supplier.

The following items are included with every model:

  • Access point
  • Grounding Lug
  • DC power connector
  • One liquid-tight adapter for sealing the cable ingress connection
  • Sealant for the antenna connections
  • Anti-seizing compound for the mounting brackets

Additional cable glands and other spare items are available in an accessory kit (Table 10). This kit contains the following items:

● 10 cable glands

● 1 console port cover

● 2 Ethernet and power port covers

● 1 DC power connector

● 1 ground lug and screws

Cisco Aironet 1532 Access Point Features

Flexible port deployment

Unique Cisco Flexible Antenna Port technology is a Cisco engineering innovation. It allows the same antenna ports to be used either for dual-band antennas to reduce footprint, or for single-band antennas to optimize radio coverage.

BandSelect

Band selection enables client radios that are capable of dual-band (2.4 és 5 GHz) operation to automatically move to a less congested 5 GHz access point.

VideoStream

The VideoStream feature provides high-quality video performance over Wi-Fi. It converts the multicast frame to a unicast frame over the air.

Multiple operational modes

This series gives you a choice of an access point, mesh, point-to-point, point-to-multipoint bridge, and workgroup bridge (WGB) bevetéseket. The internal and external antenna versions both have full lines of supported Omni and directional antennas.





    Sajnálom, nem elérhető melléklet !