Huawei TN54NQ2 WDM Board

Opis

Huawei TN54NQ2 WDM Board is 4-channel 10G line service processing board WDM equipment

Huawei TN54NQ2 WDM Board Product Overview

Huawei TN54NQ2 WDM Board belongs to the relay type, and realizes the relay of 4 OTU2 / OTU2e signals.

The sending and receiving optical ports of the same relay signal must be configured as follows, otherwise the ESC communication will fail.

IN1–> OUT1 and IN2–> OUT2

IN3–> OUT3 and IN4–> OUT4

In this scenario, the input wavelength and output wavelength are different.

The NQ2 board is used as an electrical relay station in the system to realize the electrical relay function of corresponding optical signals.

Huawei TN54NQ2 WDM Board Product Pictures

Huawei TN54NQ2 WDM Board Product Specifications

Marka	Huawei
Model	TN54NQ2
basic skills	used in the electrical relay station in the system to realize the electrical relay function of the corresponding optical signal.
Relay rate	OTU2: OTN usluga, the rate is 10.71Gbit / s
	OTU2e: OTN usluga, the rate is 11.1Gbit / s
OTN function	The WDM side supports OTU2 / OTU2e interface.
	Use the frame format and overhead processing recommended by ITU-T G.709.
	OTU2 layer: Support SM function.
	ODU2 layer: Podržava PM i TCM funkcije, non-intrusive monitoring functions of PM and TCM.
WDM specifications	Support ITU-T G.694.1 DWDM technical specifications.
ALS function	Ne podržava
Test frame function	Ne podržava
Physical layer clock	Ne podržava
Protection method	Ne podržava
Loopback	Ne podržava
Supported protocols or standards	Transparent transmission protocol or standard (no performance monitoring)
	Protocols or standards handled (with performance monitoring)	ITU-T G.805
		ITU-T G.806
		ITU-T G.709
		ITU-T G.872
		ITU-T G.7710
		ITU-T G.798
		ITU-T G.874
		ITU-T M.3100
		ITU-T G.874.1
		ITU-T G.875
		ITU-T G.808.1
		ITU-T G.841
		ITU-T G.8201
		ITU-T G.694.1

Huawei TN54NQ2 WDM Board Product Features

• Funkcija podešavanja valne duljine

Support wavelength dimmable module. Može postići:

The wavelength-division side optical signal is adjustable in the 80-wave range of the C-band 50 GHz interval.

• Kodiranje ispravljanja pogrešaka

Podržava FEC kodiranje, u skladu s preporukama ITU-T G.709.

Podržava AFEC-2 kodiranje, u skladu s preporukama ITU-T G.975.1.

The boards with different error correction codes cannot be connected.

• Praćenje performansi i praćenje alarma

Omogućuje praćenje BIP8 bajtova (burst mode) za lociranje kvarova na liniji.

Provide the following monitoring functions: praćenje prednaponske struje lasera, praćenje radne temperature lasera, praćenje optičke snage, itd.

Podržava OTN nadzor performansi i funkcije nadzora alarma.

Huawei TN54NQ2 WDM Board Product Applications

Oprosti, nema dostupnog priloga !