100GQSFP28PSM4 ऑप्टिकल मॉड्यूल और QSFP28CWDM4 ऑप्टिकल मॉड्यूल के बीच क्या अंतर है?
100GQSFP28 ऑप्टिकल मॉड्यूल एक ऑप्टिकल मॉड्यूल है जिसका उपयोग 100G ट्रांसमिशन को सपोर्ट करने के लिए किया जा सकता है, and it can also be said to be a new type of solution. The cost and power consumption of the data center is one of the important factors that its builders need to consider, which is also an important driving force for the development of the optical communications market. Looking back at the development history of 100G optical modules, the development and improvement of its packaging styles (सीएफपी, सीएफपी2, CFP4) and standards are also mainly centered on two aspects of low cost and low power consumption. In the market, there are many 100GQSFP28 optical modules, but in this article, Gigalight Communications introduces two 100GQSFP28 optical modules-100GQSFP28PSM4 optical modules and QSFP28CWDM4 optical modules. What is the difference between the two?
First of all, let’s first understand the advantages of 100GQSFP28 optical module:
1: Port density
The first generation of 100G optical modules was a very large CFP optical module, and then CFP2 and CFP4 optical modules appeared. उनमें से, the CFP4 optical module is the latest generation of 100G optical modules, and its width is only 1/4 of the CFP optical module. The packaging style of the QSFP28 optical module is smaller than that of the CFP4 optical module, which means that the QSFP28 optical module has a higher port density on the switch.
2: बिजली की खपत
The power consumption of the QSFP28 optical module is usually no more than 3.5W, while the power consumption of other 100G optical modules is usually between 6W and 24W. From this point of view, the power consumption of QSFP28 optical modules is much lower than other 100G optical modules.
3: Cost
The current data center is mainly a 10G network architecture, and its interconnection solutions are mainly 10GBASE-SR optical modules and duplex LC multimode fiber jumpers. If you directly upgrade to a 40/100G network based on the existing 10G network architecture, Will save a lot of time and cost.
100GQSFP28PSM4 ऑप्टिकल मॉड्यूल और QSFP28CWDM4 ऑप्टिकल मॉड्यूल के बीच क्या अंतर है?
1: Overview of 100GQSFP28PSM4 optical module
1: QSFP28PSM4 optical module is a high-speed, low-power product, with a hot-swappable QSFP appearance, built-in digital diagnostic function, और 8 optical fibers, each with a data rate of 25Gbps;
2: QSFP28PSM4 optical module adopts 12-channel MTP interface, and realizes 8-channel optical fiber bidirectional 100G transmission at the same time;
3: Although the QSFP28PSM4 optical module runs in a single-mode fiber, its wiring structure is the same as that of the QSFP28SR4 optical module. Without changing the existing wiring structure, using the QSFP28PSM4 optical module can save the conversion cost between multi-mode and single-mode.
4: The working principle of QSFP28PSM4 optical module is almost the same as that of QSFP28SR4 optical module. The difference is that the QSFP28PSM4 optical module operates on single-mode fiber, while the QSFP28SR4 optical module operates on OM4 multimode fiber.
100GCWDM4 is also a multi-source agreement (एमएसए). The 100GCWDM4 optical module introduces WDM technology and adopts a duplex LC interface. When used with a single-mode fiber, the transmission distance can reach 2km.
The transmission rate of 100GQSFP28CWDM4 optical module is 103.1Gbp, which is mainly used in computing, उच्च-आवृत्ति व्यापार और अन्य क्षेत्र. Its cost is significantly higher than QSFP28PSM4 optical module. Through coarse wavelength division multiplexing (सीडब्ल्यूडीएम) तकनीकी, the QSFP28CWDM4 optical module multiplexes four wavelengths of 1270nm, 1290एनएम, 1310nm and 1330nm onto a single-mode optical fiber for transmission.
[Optical Module Package]
The optical module package used by the 100GQSFP28CWDM4 optical module is QSFP28, which is an optical module that can be used to support 100G transmission. यह ट्रांसमिशन दर बढ़ाने के लिए अल्ट्रा-बड़े डेटा केंद्रों की वर्तमान जरूरतों के लिए एक आदर्श समाधान प्रदान करता है. QSFP28 ऑप्टिकल मॉड्यूल का पैकेज आकार CFP4 की तुलना में बड़ा है। ऑप्टिकल मॉड्यूल छोटा है, which means that the QSFP28 optical module has a higher port density on the **.
【Digital diagnosis function】
100GQSFP28CWDM4 ऑप्टिकल मॉड्यूल में एक अंतर्निहित डिजिटल डायग्नोस्टिक फ़ंक्शन है, जो ऑप्टिकल मॉड्यूल के ट्रांसमिट ऑप्टिकल पावर जैसे महत्वपूर्ण प्रदर्शन मापदंडों की प्रभावी ढंग से निगरानी कर सकता है, ऑप्टिकल शक्ति प्राप्त की, तापमान, वोल्टेज आपूर्ति, लेजर बायस करंट, और चेतावनी संदेश.
【cost】
100GQSFP28CWDM4 ऑप्टिकल मॉड्यूल को 40G के बिना सीधे 25G से 100G में अपग्रेड किया जा सकता है, जो वायरिंग सिस्टम की लागत को काफी कम कर देता है.
