- Description
- Enquête
- Pièce jointe
Description
Huawei OptiXaccess EA5801E-GP16 est un OLT en forme de boîte compact et basse densité, qui fournit un accès GPON, and supports passive optical LAN (Pôle) and fiber to the home (FTTH) solutions. Il transporte tous les services sur un seul réseau fibre, simplifying network
architecture and reducing OPEX.
Huawei OptiXaccess EA5801E-GP16 Product Overview
The product is a box-shaped Optical Line Terminal (BTA) with Gigabit Passive Optical Network (GPON) accéder, supporting both Passive Optical LAN (Pôle) and Fiber To The Home (FTTH) solutions. En outre, It carries all services over a single fiber network, considerably simplifying network architecture as well as reducing Operating Expense (OPEX).
Only requiring a remarkably compact installation space of just 1U, EA5801E-GP16 is applicable to Access Point (PA) convergence on a small scale. As such, OptiXaccess EA5801E-GP16 is well-suited to lightweight deployment in enterprises, with a single OLT meeting the service-bearing requirements for the entire campus.
Huawei OptiXaccess EA5801E-GP16 Product Pictures
Huawei OptiXaccess EA5801E-GP16 Product Specifications
| Paramètres | Huawei OptiXaccess EA5801E-GP16 |
| Dimensions (H x L x P) | Hors oreilles de montage: 43.6 X 442 X 220 mm |
| Y compris les oreilles de montage CEI: 43.6 X 482.6 X 220 mm | |
| Y compris les oreilles de montage ETSI: 43.6 X 535 X 220 mm | |
| Maximum Fully-Loaded Weight (CC) | 4.2 kg |
| Maximum Fully-Loaded Weight (CA) | 4.6 kg |
| Mode d'alimentation | Alimentation CC (double sauvegarde) |
| Alimentation CA (double sauvegarde) | |
| Plage de tension de fonctionnement | Alimentation CC: –38,4 V à –72 V |
| Alimentation CA: 100–240 V | |
| Tension nominale | Alimentation CC: –48/–60 V |
| Alimentation CA | |
| Courant d'entrée maximal | Alimentation CC: 6 UN |
| Alimentation CA: 2.5 UN | |
| Température ambiante | –40°C à +65°C |
| The device can start up at temperatures as low as –25°C. | |
| 65°C refers to the highest temperature measured at the air intake vent of a service subrack. | |
| Humidité ambiante | 5–95 % HR |
| Pression atmosphérique | 70–106kPa |
| Altitude | < 4000 m. The air density varies with the altitude and will affect the heat dissipation of the device. Donc, la température de l'environnement de travail de l'appareil varie en fonction de l'altitude. |
| System Switching Capacity | 140 Gbit/s |
| Adresses MAC | 32,768 |
| Accéder à l'Ontario | 1024 |
| IPv4 Routing Table | 8192 |
| IPv6 Routing Table | 4096 |
| Tableau ARP | 16,384 |
| Bit Error Rate (BER) in Full Load | Un BER inférieur à 10 e-7 pour un port qui transmet des données en pleine charge. |
| 10 Ports amont GE/GE | 4 |
| Ports de service | 16 GPON |
| Consommation d'énergie | Consommation d'énergie statique: 55 W |
| Consommation électrique typique: 95 W | |
| Consommation d'énergie maximale: 140 W | |
| Note: The power consumption of a product is tested in the following conditions | |
| • Static power consumption: 25°C, no optical module in optical ports, and no service. | |
| • Typical power consumption: 25°C, 4 X 10 GE upstream ports, 16 x GPON ports on the user side, full services, and maximum traffic. | |
| • Maximum power consumption: 65°C, 4 X 10 GE upstream ports, 16 x GPON ports on the user side, full services, and maximum traffic. |
Huawei OptiXaccess EA5801E-GP16 Product Features
- Requires only 1U installation space for small-scale AP convergence, meeting service-bearing requirements for an enterprise or campus with just a single OLT
- Suitable for installation in both indoor and outdoor cabinets, the OLT can withstand high temperatures, saving both manpower and cabinet space
- Prend en charge deux alimentations AC ou DC, fournissant une alimentation flexible et une haute fiabilité.
Huawei OptiXaccess EA5801E-GP16 Product Applications
