Type vertical de boîtier d'épissure de fibre optique 1 Dans 3 Dehors 24 Cœur
- Description
- Enquête
- Pièce jointe
Description
Type vertical de boîtier d'épissure de fibre optique 1 Dans 3 Dehors 24 Core is designed to protect fiber optic cable splicing and joints. They feature a seal that makes them both dust and weather resistant. They are used in underground applications and temperatures ranging from -40°C to 65°C, and widely applied in CATV, telecommunications and fiber optic networks
Type vertical de boîtier d'épissure de fibre optique 1 Dans 3 Dehors 24 Présentation générale
La fermeture verticale de la fibre optique ressemble à un dôme, on l'appelle donc également fermeture d'épissure de fibre optique à dôme ou fermeture de dôme à fibre.. La forme du dôme permet de l'enterrer facilement dans de nombreuses applications, bien qu'il puisse également être utilisé en surface.
Fermeture à fibre optique, également connu sous le nom de fermetures d'épissure de fibre optique, est un dispositif utilisé pour fournir de l'espace et une protection aux câbles à fibres optiques épissés ensemble. Le boîtier pour fibre optique connecte et stocke les fibres optiques en toute sécurité, soit dans l'usine extérieure, soit dans les bâtiments intérieurs.. Il peut fournir une protection au joint de fibre et aux câbles à fibre car ils ont une excellente résistance mécanique et une coque solide., which ensures the joints are not damaged by the hostile environmen
Type vertical de boîtier d'épissure de fibre optique 1 Dans 3 Dehors 24 Images de base
Type vertical de boîtier d'épissure de fibre optique 1 Dans 3 Dehors 24 Spécifications de base
Article | fiber optic splice closure |
Utiliser | Dome splice closure for Fiber optic manufacture |
Taper | Dome splice closure |
Numéro de modèle |
1 Dans 3 Dehors 24 Cœur |
Inner box size | 28.5*28*51cm |
Outer box size | 58.5*57.5*53cm |
waterproof rating | IP68 |
Standard and non-standard | Standard |
Matériel | impact resistant PP |
température | -35℃~70℃ |
characterisation | cold and heat resistant |
Selling Units | Single item |
Single package size | 47.5X23.5X20.5 cm |
Single gross weight |
5.000 kg |
Couleur |
Noir |
Type vertical de boîtier d'épissure de fibre optique 1 Dans 3 Dehors 24 Fonctionnalités principales
- V and Chemical Resistant
- May be used for Cut, Uncut and Taut Sheath Applications
- Dust and Waterproof design
- Ideal for Aerial and Underground applications
- Easy setup and installation
- Matériel: Polycarbonate Plastic
- Largeur: 180mm
- Hauteur: 540mm
Type vertical de boîtier d'épissure de fibre optique 1 Dans 3 Dehors 24 Core Performance requirements
After the fiber connector is protected by the splice closure and should be protected from moisture, the attenuation of the fiber connector before protection should not be increased, and the following requirements should be met:
- Optical performance
The remaining optical fibers in the optical cable splice closure are coiled in the optical fiber placement device, and there should be no obvious additional attenuation of the optical fiber splice splice closure during the installation and use of the optical fiber splice closure operation.
- Sealing performance
After the optical cable splice closure is packaged according to the specified operating procedures, the inflation pressure in the optical cable splice splice closure is (100±5) kPa, and there should be no bubbles escaping after soaking it in a clean water container at room temperature for 15 minutes, or there should be no change in the barometer indication after stable observation for 24 heures.
- Resealing performance
The optical cable splice closure is tested after repeating the package 3 times according to the specified operating procedure. The inflation pressure in the fiber optic cable splice splice box is l00kPa±5kPa, and there should be no bubbles escaping after soaking in a clean water container at room temperature for 15 minutes, or there should be no change in the barometer indication for 24 heures.
- Mechanical properties
After the following tests, the box body and each part of the box of the optical cable splice splice box should not change, and if necessary, the light inspection or opening of the box should be done. The following tests should be filled with (60±5) kPa air pressure in the fiber optic cable splice closure and the air pressure should not change after the test; Stable observation in a clear water container immersed in room temperature No bubbles should escape or stable observation for 24 heures, the barometer index should be unchanged, and the shell and its components should be free of cracks, damage and obvious deformation
Type vertical de boîtier d'épissure de fibre optique 1 Dans 3 Dehors 24 Articles de base et plus
Type vertical de boîtier d'épissure de fibre optique 1 Dans 2 Dehors 12 Cœur
Type vertical de boîtier d'épissure de fibre optique 1 Dans 3 Dehors 12 Cœur
Type vertical de boîtier d'épissure de fibre optique 1 Dans 3 Dehors 24 Cœur
Type vertical de boîtier d'épissure de fibre optique 1 Dans 3 Dehors 48 Cœur
Type vertical de boîtier d'épissure de fibre optique 1 Dans 4 Dehors 72 Cœur
Type vertical de boîtier d'épissure de fibre optique 1 Dans 4 Dehors 96 Cœur
Type vertical de boîtier d'épissure de fibre optique 1 Dans 4 Dehors 144 Cœur
Type vertical de boîtier d'épissure de fibre optique 1 Dans 3 Dehors 24 Applications principales
Désolé, aucune pièce jointe disponible !