Catalyseur Cisco 3650 Commutateurs en série

Description

Catalyseur Cisco 3650 Series Switches are Next-generation enterprise access layer switches supporting stand-alone and stacked deployments. It lays the foundation for a complete convergence of wired and wireless on a single platform. Le catalyseur Cisco 3650 is built on the advanced Cisco StackWise®-160 and incorporates the new Cisco Unified Access Data Plane (PDUA) Application Specific Integrated Circuit (ASIC). This switch enables unified wired and wireless policy enforcement, application visibility, la flexibilité, application optimization, and superior resiliency. Le catalyseur Cisco 3650 Series Switches fully support IEEE 802.3at Enhanced Power over Ethernet (PoE+) and offer field-replaceable modular redundant fans and power supplies. With a depth of no more than 12 pouces, the Cisco Catalyst 3650 Series Switches can be easily deployed in remote branch offices and offices with narrow wiring closets with limited depth. This family of switches helps you lower your total cost of ownership (Coût total de possession) while increasing wireless productivity.

Catalyseur Cisco 3650 Présentation des commutateurs de série

 

Catalyseur Cisco 3650 Series Switches Characteristics

1, Integrated wireless controller features with the following features:

2, Capacité sans fil jusqu'à 40G par commutateur (48 modèle de port)

3， Chaque entité de commutation (commutateur ou pile) prend en charge jusqu'à 50 points d'accès et 1000 clients sans fil

4， 24 et 48 10/100/1000 data and PoE+ modules with Energy Efficient Ethernet (EEE) enabled ports

5， 3 fixed uplink modules with 4 Ports Ethernet Gigabit, 2 10 Ports Ethernet Gigabit, ou 4 10 Ports Ethernet Gigabit

6， Lower noise 24-port and 48-port 10/100/1000 PoE+ modules with depth reduction to 29.51 cm (11.62 dans) for shallower cabinets in the enterprise, retail and branch office environments

7， Scalability and resiliency with optional Cisco StackWise-160 technology for stack throughput of 160 Gbit/s

8, Double alimentation modulaire redondante et 3 modular fans for redundancy [1]

9，3650 mini SKU supports external power system RPS2300, providing redundancy 1

10， Single-rack unit (1RU) facteur de forme, fully compliant with IEEE 802.3at (PoE+), providing 30W power for all ports

Catalyseur Cisco 3650 Modèles de commutateurs de série

Des modèles	Fixed uplink	10/100/1000 port Ethernet	Alimentation CA par défaut	Up to PoE power
WS-C3650-24TS	4 small package hot swap (SFP)	24	250 WAC	–
WS-C3650-48TS	Port Ethernet Gigabit	48
WS-C3650-24PS		24 PoE+	640 WAC	390 W
WS-C3650-48PS		48 PoE+
WS-C3650-48FS		48 PoE+	1025 WAC	775 W
WS-C3650-24TD	2 SFP+ 10 Gigabit Ethernet or 4 SFP Gigabit Ethernet	24	250 WAC
WS-C3650-48TD		48
WS-C3650-24PD		24 个 PoE+	640 WAC	390 W
WS-C3650-24PDM		24 个 PoE+	Fixé 640 WAC	390 W
WS-C3650-48PD		48 个 PoE+	640 WAC	390 W
WS-C3650-48FD		48 个 PoE+	1025 WAC	775 W
WS-C3650-48TQ	4 SFP+ 10 Gigabit Ethernet or 4 SFP Gigabit Ethernet	48	250 WAC
WS-C3650-48PQ		48 个 PoE+	640 WAC	390 W
WS-C3650-48FQ		48 个 PoE+	1025 WAC	775 W
WS-C3650-48FQM		48 个 PoE+	Fixé 975 WAC	775 W

Fixed uplink
All Cisco Catalyst 3650 Series Switches feature a fixed internal uplink port. When purchasing a switch, customers can choose from three uplink port configurations:

● 4 small package hot-swap (SFP) Ports Ethernet Gigabit
● 2 SFP+ 10 Gigabit Ethernet or 4 SFP Gigabit Ethernet
● 4 SFP+ 10 Gigabit Ethernet or 4 SFP Gigabit Ethernet
The SFP+ interface supports both 10 Gigabit Ethernet ports and Gigabit Ethernet ports. See Table 1 for a description of the base switch model and corresponding uplink ports. See Table 2 for a description of the various uplink port interface options.

Catalyseur Cisco 3650 Avantages des commutateurs en série

Converged wired and wireless access

Le catalyseur Cisco 3650 is a standalone stackable access switching platform that provides wired and wireless services on a single platform based on Cisco IOS XE software. With this capability, Cisco is the first to offer a rich set of features that work seamlessly across wired and wireless networks, such as high availability based on stack-on-state switching (SSO), granular QoS, sécurité, and Flexible Netflow (FNF). En outre, wired and wireless capabilities are bundled into a single Cisco IOS software image, reducing the number of software images that users need to verify/prove before they can enable imaging on their network. The single-console port management of the Command Line Interface (CLI) reduces the number of touchpoints used to manage wireless and wireline services, reducing network complexity, simplifying network operations, and reducing the total cost of ownership of the management infrastructure.

The convergence of wired and wireless not only increases the wireless bandwidth in the entire network but also expands the scale of wireless deployment. Each 48-port Cisco Catalyst 3650 delivers 40 Gbps of wireless throughput (20 Gbps for 24-port models). This wireless capacity increases as the number of stacked members increases. This feature can ensure that the network can be extended to support current wireless bandwidth requirements, such as IEEE 802.11n-based access points, and support future wireless standards such as IEEE 802.11ac. En outre, the Cisco Catalyst 3650 can be assigned wireless controller capabilities for better scalability. Each Cisco Catalyst 3650 switch/stack can operate as a wireless controller in two modes:

● Mobile Agent (MA): This is the default mode when the Cisco Catalyst 3650 Switch is delivered. Dans ce mode, the switch is able to terminate the CAPWAP tunnel from the access point and provide a wireless connection to the wireless client. Dans ce mode, security and QoS policies for maintaining the wireless client database, configuring and implementing wireless clients and access points can be performed. In mobile proxy mode, there is no need to use additional licenses on top of IP Base.
● Mobility Controller (MC): Dans ce mode, the Cisco Catalyst 3650 Switch performs all mobile agent tasks and performs mobile coordination, Radio Resource Management (RRM), and Cisco CleanAir® coordination within the mobile subdomain. The Move Controller mode can be enabled on the switch command line interface. An IP Base level license is required when the Cisco Catalyst 3650 switch acts as a mobility controller. In larger deployments, the centrally located Cisco 5508 Wireless LAN Controller (WLC 5508), Module de services sans fil Cisco 2 (WiSM2) (when AireOS version 7.3 is running), and Wireless LAN Controller 5760 also do this.
With a mobile agent located in the wiring closet, each switch provides 40 Gbps of wireless bandwidth (nx 40 Gbps for stacks of n switches) while the mobile controller is used to manage some of the central wireless functions, both of which Combined, a converged, access-based wireless deployment delivers industry-leading wireless scalability and significantly increases wireless throughput.

Désolé, aucune pièce jointe disponible !