- বর্ণনা
- অনুসন্ধান
- সংযুক্তি
বর্ণনা
ZTE PRVR Power Module is –48 V/–60 V DC input supply power board applied to ZTE ZXA10 C600 ওএলটি C650 এবং C680
ZTE PRVR Power Module Product Overview
ZTE PRVR Power Module is –48 V/–60 V DC input to supply power board for installation on ZTE ZXA10 C600 OLT C650 and C680. If the input voltages of the two power cards are the same, the two power cards operate in load sharing mode. The dimensions is 133.8 (এইচ) × 25.5 (ডব্লিউ) × 225 (ডি), and its horizontal placement in the chassis significantly saves useful space for the installation of other expansion cards. ZTE PRVR Power Board has additional system monitoring functions. Environment main features: Filtration and current limitation for input power status monitor and alarm indicator, ইত্যাদি. Support of electric serial number Built-in temperature sensor Voltage, current and power functions
ZTE PRVR Power Module Product Pictures
ZTE PRVR Power Module Product Specifications
| নির্দেশক | Status | বর্ণনা |
| ব্র্যান্ড | জেডটিই | |
| মডেল | PRVR | |
| মাত্রা (মিমি) | 133.8 (এইচ) × 25.5 (ডব্লিউ) × 225 (ডি) | |
| ওজন (কেজি) | 0.59 | |
| RUN | LED is OFF | The card is powered off l The card does not match l CPU is not started |
| Green LED is ON | The card self-checking completes but fails to receive data from the switching and control card or NM | |
| Green LED flashes irregularly | The card is downloading data from the network management server | |
| Green LED flashes slowly (05 Hz) | The card runs properly | |
| Red LED is ON | Card hardware failure | |
| Red LED flashes slowly (05 Hz) | The card is plugged in the wrong slot | |
| Yellow LED flashes slowly (05 Hz) | The software version of the card does not match that of the switching and control card Auto-update is not configured on the card | |
| ACTi (i = 1–16) | LED is OFF | No ONU is configured on the EPON interface |
| The EPON interface has no optical module installed | ||
| The EPON interface is shutdown | ||
| The EPON interface is TypeB protection port | ||
| Green LED flashes | The EPON interface and connected ONUs work properly | |
| Red LED is ON | The EPON interface has Loss Of Signal (LOS) alarms | |
ZTE PRVR Power Module Product Features
- High-end route and fully distributed programmable architecture.
- Separated control and forwarding planes makes the system more reliable.
- Fully compatible with multiple generations of PON.
- Fully compatible with multiple technology directions.
ZTE PRVR Power Module and more Power models
| PRVR | Type-R DC power interface card |
| PRVR(গ) | Type-RC DC power interface card |
| PRSF | Type-F DC power interface card |
| PRAF | Type-F AC power interface card |
ZTE PRVR Power Module Product Applications
দুঃখিত, কোন সংযুক্তি উপলব্ধ !
